Co2 Laser Cutting & Engraving
Technician parameters
| Working Area | 1000*600mm | 1300*900mm | 1600*1000mm | 1800*1200mm |
| Laser Power | 80W/100w/120w/150w/ | |||
| Laser Type | CO2 Sealed Laser Tube ,10.6μm | |||
| Cooling Type | Water Cooling | |||
| Engraving Speed | 0-60000mm/min | |||
| Cutting Speed | 0-40000mm/min | |||
| Laser Output Control | 0-100% set by software | |||
| Min. Engraving Size | Chinese: 2.0mm*2.0mm, English Letter: 1.0mm*1.0mm | |||
| Highest Scanning Precision | 4000DPI | |||
| Locating Accuracy | ≤+0.01mm | |||
| Controlling Software | DSP Control System | |||
| Graphic Format Supported | DST PLT BMP DXF DWG AI LAS,etc | |||
| Compatible Software | CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc. | |||
| Color Separation | Yes | |||
| Drive System | High-precision 3-phase Stepper Motor | |||
| Auxiliary Equipments | Exhaust Fan and Air Exhaust Pipe | |||
| Power Supply | AC110V/220V+10%,50HZ/60HZ | |||
| Working Environment | Temperature:0-45C,Humidity 5-95%(No Condensate Water) | |||